Follow

Submissions from 2013

Systemic Innovation, Donald A. Coates

Link

Multiphysics Design and Development of Heterogeneous Functional Materials for Renewable Energy Devices: The HeteroFoaM Story, K. L. Reifsnider, Wilson K.S. Chiu, Kyle S. Brinkman, Yanhai Du, Arata Nakajo, Fazle Rabbi, and Qianlong Liu

Submissions from 2012

Link

Hybrid Gear Preliminary Results-Application of Composites to Dynamic Mechanical Components, Robert F. Handschuh, Gary D. Roberts, Ryan R. Sinnamon, David B. Stringer, Brian D. Dykas, and Lee W. Kohlman

Link

Influence of Surface Roughness on Traction and Scuffing Performance of Lubricated Contacts for Aerospace and Automotive Gearing, Sam Shon, Ahmet Kahraman, Kelsen LaBerge, Brian Dykas, and David B. Stringer

Link

Physics-Based Modeling Strategies for Diagnostic and Prognostic Application in Aerospace Systems, David B. Stringer, Pradip N. Sheth, and Paul E. Allaire

Submissions from 2011

Link

Environmental Effects on a Thermally Self-Sustained SOFC Hot Zone, Daan Cui, Yanhai Du, Kenneth Reifsnider, and Fanglin Chen

Link

Characterization of Propane-Fueled SOFC Portable Power Systems, Yanhai Du, Daan Cui, and Kenneth Reifsnider

Link

Startup Characteristics of Propane-Fueled Solid Oxide Fuel Cell Hot Zones, Yanhai Du, Daan Cui, Kenneth Reifsnider, and Fanglin Chen

Link

Startup Characteristics of Propane-Fueled Solid Oxide Fuel Cell Hot Zones, Yanhai Du, Daan Cui, Kenneth Reifsnider, and Fanglin Chen

Link

One Thousand-Hour Long Term Characteristics of A Propane-Fueled Solid Oxide Fuel Cell Hot Zone, Yanhai Du, Kenneth Reifsnider, and Fanglin Chen

Link

A Review of the Implications of Silica in Solid Oxide Fuel Cells, Michael Lankin, Yanhai Du, and Caine Finnerty

Link

Modal Reduction of Geared Rotor Systems with General Damping and Gyroscopic Effects, David B. Stringer, Pradip N. Sheth, and Paul E. Allaire

Link

Advanced Anode-Supported Micro-Tubular SOFC Development, Chendong Zuo

Submissions from 2009

Link

Advanced Tubular Solid Oxide Fuel Cells with High Efficiency for Internal Reforming of Hydrocarbon Fuels, Praveen K. Cheekatamarla, Caine M. Finnerty, Yanhai Du, Juan Jiang, Jian Dong, P. G. Dewald, and C. L. Robinson

Link

Spectroscopic Characterisation and Discussion of Nanocarbon Ensembles in Electrical Applications, C.-C. Teng, Shin-Min Song, J.C.-M. Sung, and C.-T. Lin

Submissions from 2008

Link

Thermal Stability of Portable Microtubular SOFCs and Stacks, Yanhai Du, Caine M. Finnerty, and Juan Jiang

Link

Thermal Stability of Portable Micro-Tubular Solid Oxide Fuel Cell and Stack, Yanhai Du, Caine M. Finnerty, and Juan Jiang

Submissions from 2007

Link

Performance Characteristics of an Integrated 50We Portable JP-8 SOFC - Reformer System, Praveen K. Cheekatamarla, Caine M. Finnerty, Yanhai Du, Yixin Lu, Charles L. Robinson, Paul G. DeWald, and S. D. Andrews

Link

Geometric Effects on Tubular Solid Oxide Fuel Cells, Caine M. Finnerty, Yanhai Du, Benjamin J. Emley, Praveen K. Cheekatamarla, Weizhong Zhu, Jun Cai, and Rebecca Sharp

Link

Portable Propane Micro-Tubular SOFC System Development, Caine M. Finnerty, Charles Robinson, Stanley Andrews, Yanhai Du, Praveen K. Cheekatamarla, Paul G. Dewald, Yixin Lu, and Timothy Schwartz

Link

Fabrication and Characterization of Tubular Solid Oxide Fuel Cells, N. M. Sammes and Yanhai Du

Submissions from 2006

Link

Assembling Single Cells to Create a Stack: The Case of a 100 W Microtubular Anode-Supported Solid Oxide Fuel Cell Stack, N. M. Sammes, Roberto Bove, and Yanhai Du

Submissions from 2005

Link

Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate, Narottam P. Bansal, Nigel M. Sammes, and Yanhai Du

Link

Intermediate-Temperature SOFC Electrolytes, Nigel M. Sammes and Yanhai Du

Link

Design and Fabrication of a 100 W Anode Supported Micro-Tubular SOFC Stack, N. M. Sammes and Yanhai Du

Link

Dynamic Modeling of Single Tubular SOFC Combining Heat/mass Transfer and Electrochemical Reaction Effects, X. Xue, J. Tang, N. M. Sammes, and Yanhai Du

Submissions from 2004

Link

Fabrication and Properties of Anode-Supported Tubular Solid Oxide Fuel Cells, Yanhai Du and N. M. Sammes

Link

Time Dependent Properties and Performance of a Tubular Solid Oxide Fuel Cell, Gang Ju, Kenneth Reifsnider, Xinyu Huang, and Yanhai Du

Submissions from 2003

Link

Fabrication and performance of LaGaO3-Based tubular SOFC’s, Yanhai Du and Nigel M. Sammes

Link

Extruded Tubular Strontium- and Magnesium-Doped Lanthanum Gallate, Gadolinium-Doped Ceria, and Yttria-Stabilized Zirconia Electrolytes Mechanical and Thermal Properties, Yanhai Du, N. M. Sammes, Geoffrey A. Tompsett, Deliang Zhang, Janis Swan, and Mark Bowden

Submissions from 2002

Link

Modeling Gait Transitions of Quadrupeds and Their Generalization with CMAC Neural Networks, Jian-Nan Lin and Shin-Min Song

Submissions from 2001

Link

Fabrication of Tubular Electrolytes for Solid Oxide Fuel Cells Using Strontium- and Magnesium-Doped LaGaO3 Materials, Yanhai Du and Nigel M. Sammes

Link

Dynamic Modeling, Stability, and Energy Efficiency of a Quadrupedal Walking Machine, Shin-Min Song and Ben-Sheng Lin

Submissions from 2000

Link

Optimisation Parameters for the Extrusion of Thin YSZ Tubes for SOFC Electrolytes, Yanhai Du, Nigel M. Sammes, and Geoffrey A. Tompsett

Submissions from 1999

Link

Phase Stability of Bismuth Lead Antimony Oxide, Yanhai Du, Nigel M. Sammes, Geoffrey A. Tompsett, and Y. Zhang

Link

The use of X-ray analysis in determining the crystal structure in Φ-Bi8Pb5O17, Y. Zhang, Nigel M. Sammes, and Yanhai Du

Submissions from 1989

Link

A Strategy of Wave Gait for a Walking Machine Traversing a Rough Planar Terrain, Xi-Ding Qiu and Shin-Min Song

Submissions from 1987

Link

Motion Study of Two- and Three-Dimensional Pantograph Mechanisms, Shin-Min Song, Jong-Kil Lee, and Kenneth J. Waldron

Link

Geometric Design of a Walking Machine for Optimal Mobility, Shin-Min Song and Kenneth J. Waldron

Submissions from 1985

Link

Computer-Aided Geometric Design of Legs for a Walking Vehicle, Shin-Min Song, Kenneth J. Waldron, and Gary L. Kinzel

Submissions from 1984

Link

Computer-Aided Design of a Leg for an Energy Efficient Walking Machine, Shin-Min Song, V. J. Vohnout, K. J. Waldron, and G. L. Kinzel